User's Manual

The meter displays the code number and the
testing symbols ( ) together. In 5 seconds the
meter automatically enters into testing mode.
• 40 • • 41 •
Test Procedure Test Procedure
The symbol of blood is blinking.
Please apply the sample to the test area of test
strip until you hear beep sound.
The meter displays , blinking in order,
which means it is under test.
When the test is completed (in about maximum
2 minutes), the meter displays the test
result of with the symbol.
Press mode ( ) button after a test strip is
inserted and confirm if the meter recognizes the
right test strip by checking out the corresponding
symbol on its display.
The symbol of blood is blinking.
Please apply the sample to the test area of test
strip until you hear beep sound.
3) Triglyceride test