User's Manual

• 50 • • 51 •
The Lipid Pro
TM
results can be transmitted to a personal computer.
Lipid Pro
TM
software and an interface cable are required for transmitting
results of lipid profile and glucose measurement system to a personal
computer.
The software is available free of charge from http://www.infopia21.com
Interface(PC)cable and Thermal printer can be bought from your local
distribute prorvider.
Lipid pro
TM
Software and Thermal Printer
T
C
HD
L
TG
MEM
Meter
Your meter does not require special maintenance or cleaning. Avoid getting
dirt, dust, blood, control solution, or liquids on the meter, the test port, or data
port.
Your meter operation temperature is 64~86ºF(18~30ºC ).
It is recommended that you store the meter in its carrying case after each
use.
A cloth dampened with water and mild detergent can be used to wipe down
the outside of the meter. Your LipidPro
TM
meter is a precision instrument.
Please handle it with care.
1) Do not disassemble or modify the meter.
2) Do not place the meter in places with high humidity.
3) Do not place the meter in polluted or dusty areas.
4) Do not expose the meter to impact, shock, vibration, inclination, etc. and
keep it in a safe place.
5) Do not place the meter with chemical products or with gases.
6) Keep it away from direct sunlight.
7) Close the vial, immediately after taking out the Test Sensor for the test.
8) Keep the Test Sensor away from children.
9) Keep the lancing device clean by using alcohol or soap and water.
10) The meter should be cleaned with soft cloth or paper tissue, in case of
dirt.
Lancing Device:
Clean the lancing device and caps with soap and luke warm water. To
disinfect the lancet device, prepare a disinfectant solution of one part
household bleach to 10 parts water. Dampen a cloth with this solution and
wipe the lancet device thoroughly. Soak only the cap for at least 30 minutes
in the disinfectant solution.
Do not soak the lancet device in liquid. Rinse the lancet device and cap with
water and dry thoroughly. Properly discard the used lancet.
Cleaning Your Meter and Maintenance