User's Manual

• 58 • • 59 •
Warranty
Manufacturer's Warranty:
INFOPIA USA, LLC warrants to the original purchaser that this
instrument will be free from defects in workmanship for 3 years from the
date of original purchase.
Limitations of Warranty:
This warranty is subject to the following exceptions and limitations:
1. INFOPIA USA, LLC shall not be required to replace any unit which
are damaged or malfunction due to abuse, accidents, alteration,
neglect, misuse, maintenance by someone other than INFOPIA
USA, LLC or failure to operate in accordance with the instructions.
2. INFOPIA USA, LLC reserves the right to make changes in design
without obligation to incorporate such changes into previously
manufactured instruments.
3. INFOPIA USA, LLC has no knowledge of the performance of the
instrument when the test strip is altered or modified in any manner.
For warranty service :
Purchaser must contact the local representative for assistance and/or
instructions for obtaining service of this instrument.
Important:
Speak to the INFOPIA USA, LLC local representative before return-
ing your instrument for any reason. She/he will give you the informa-
tion needed to resolve your problem correctly and efficiently.
Declaration of Conformity
FCC
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions; (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.