User manual

UpnP

Universal plug and play (UPnP) is a protocol that simplifies the

implementation of networks by allowing new hardware to connect seamlessly

to a network. The settings for this feature can be found under Network >

UPnP.

To enable UPnP, first check the Enable UPnP box. If you wish to change the

default values, there are two fields that can be edited.

• Friendly Name - An identifier for the camera on the network.

• Interval - The time between camera-sent UPnP updates.

Click OK to activate UPnP or Cancel to abort the changes before you leave

the page. Once activated, the camera will be visible to other devices on the

network.

Note: If the computer does not have UPnP installed, you can add it by going

to Start > Control Panel > Add or Remove Programs. In the Add or

Remove Programs page, select Add/Remove Windows Components >

Networking Services and click Details. Select UPnP from the popup

window, and OK out to install UPnP services.