Datasheet

www.infortrend.com
EonStor B12F
1U RAID Series
60 HDD in just space !5U
JBOD
JBOD
JBOD
JBOD
Mixing SSD and HDD (SAS or SATA) in 1U, 2U or 3U JBOD
Tiered Storage:
SAS HDD
or
SATA SSD
SATA
HDD
THE SCALABILITY
The B12F RAID series is the first
1U-profile RAID system using the
latest 2.5” enterprise-class disk drives.
The 2.5” drives enable the design of a
highly compact RAID enclosure with
better transaction rates than its 3.5”
counterpart.
Use of 2.5” drives delivers greater
performance density, takes up to 66%
less of rack space, and consumes
almost only one third less of power.
The B12F RAID subsystems support
SAS/SATA HDDs and SATA SSDs.
They can also be expanded for larger
capacity by attaching to 1U JBOD for
2.5-inch SAS and SATA drives or 2U,
3U JBOD for 3.5-inch SATA drives.
High performance density and
scalability for 4Gbps FC SAN
flexible
HIGH AVAILABILITY
HI GHLIGHT S
for 2.5-inch SFF HDD or SSD !
Utilizing drives’ dual-ported
connectivity, data paths are
r o u t ed t h r o ug h r e d un dant
e x p a nd e r s a n d c o n t ro l l e r
m o d u l e s t o e n s u r e t h e
optimal availability of your data.
In addition to path redundancy, all
components are designed to with-
stand harsh environments and
strenuous workloads. With the
help of intelligent firmware
algorithms, the enclosure can be
operated with an ease of mind.
Dual-ported
drives
JBOD
controller A
Expander Expander
JBOD
controller B
RAID
controller A
RAID
controller B
To another JBOD
To another JBOD
.
.
High availability dual-active RAID controllers and fault-tolerant
hardware
.
Host interface: 4Gbps Fibre Channel
.
Drive interface: 3Gbps 2.5” disk drives
.
Max. scalability: redundant-controller: 1 RAID + 3 JBOD
single-controller: 1 RAID + 4 JBOD
.
5th generation, ASIC400 architecture:
- Hardware RAID5 + RAID6 engine
- Dedicated, 18Gbps sync. cache channels
.
EonPath Multi-pathing software
.
Feature-rich SANWatch management suite
.
4Gbps FC to SAS/SATA
RAID and JBOD matching table:
Model
1U JBOD
(SAS/SATA)
3U JBOD
(SATA)
2U JBOD
(SATA)
Configuration
S12S-J1002-R
S12S-J1000-G
S16S-J1000-R
S16S-J1000-S
Dual-controller;
tolerant paths
fault-
Single-controller;
single path
Connections to the 2U S12S-J1000-G and the 3U JBODs require the SFF-8088 to SFF-8470
cables.
B12F-R1430
B12F-G1430/1431
B12S-J1000-R
B12S-J1000-S
OVERVIEW
EonStor
B12F-R1430
B12F-G1430
B12F-G1431
OPEN
RAID
JBOD
JBOD
JBOD
JBOD
OPEN
RAID