InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL:(02)2790-1790 FAX:(02)2790-1770 規格承認書 SPECIFICATION FOR APPROVAL Customer: Getac Technology Corp.
InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL:(02)2790-1790 FAX:(02)2790-1770 Index NO. ITEN PAGE 1. General Description 4 2. Features 4 3. Support the following operating modes 4 4. System requirements 4 5. General Specifications 5 6. Connector Pin List 5 7. PCBA Dimension 6 8. USB Device VID/PID and Firmware Version 7 9.
InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL:(02)2790-1790 FAX:(02)2790-1770 1. General Description The A140G2 NFC module is a highly integrated transceiver module for contactless reader/writer communication at 13.56 MHz. A dedicated Flash code is implemented to handle different RF protocols by an integrated microcontroller. The system host controller communicates with the A140G2 NFC module by using the USB link.
InfoThink Technology CO., LTD. 5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.) TEL:(02)2790-1790 Support by the following OS through the PCSC-Lite driver: – GNU/Linux using libusb 1.0.x and later – Mac OS Leopard (1.5.6 and newer) – Mac OS Snow Leopard (1.6.X) – Solaris – FreeBSD 5. General Specifications Bus-powered - +5V +/- 5%, 500mA Average Power Consumption Standby Mode: 0.12Watt Active/Read Card Mode: 0.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
1. 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 2. 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停 用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 3. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤,並要求平台廠商於平台上標示 「本產品內含射頻模組 CC XX xx LP yyy Z z 」。 4. 「本公司於說明書中提供所有必要資訊以指導使用者/安裝者正確的安裝及操作」。 This module is intended for OEM integrators under the following conditions: 1. List of applicable rules: This module is certified pursuant to Part 15 rules sections(15.225) and RSS-210. 2.
The host product must be labeled in a visible area with the following " Contains TX FCC ID: QYLPN7462A". The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. ISED Radiation Exposure Statement The products are compliant with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528. Maintain at least 0mm distance for body-warn condition.