Specifications

InfoThink Technology CO., LTD.
5F., No.133, Xinhu 1st Rd., Neihu Dist., Taipei City 114-94, Taiwan (R.O.C.)
TEL：[phone] FAX：[phone]
4
1. General Description
The A140G2 NFC module is a highly integrated transceiver module for contactless reader/writer
communication at 13.56 MHz.
A dedicated Flash code is implemented to handle different RF protocols by an integrated
microcontroller. The system host controller communicates with the A140G2 NFC module by using the
USB link.
The protocol between the host controller and the A140G2 NFC module, on top of this physical link is
the CCID protocol
2. Features
 High RF output power frontend IC for transfer speed up to 848 kbit/s
 NFC IP1 and NFC IP2 support
 Full NFC tag support (type 1, type 2, type 3, type 4A and type 4B, type 5)
 P2P active and passive, target and initiator
 Card emulation ISO14443 type A
 ISO/IEC 14443 type A and type B
 MIFARE classic card
 ISO/IEC 15693, and ISO/IEC 18000-3 mode 3
 Low power card detection
 Dynamic Power Control (DPC) support
 Compliance with EMV contactless protocol specification
 Compliance with NFC standards
3. Support the following operating modes:
 ISO/IEC 14443-A and B, MIFARE
 JIS X 6319-4 (comparable with FeliCa scheme)
 ISO/IEC 15693, ICODE, ISO/IEC 18000-3 mode 3
 NFC protocols - tag reader/writer, P2P
 ISO/IEC 14443- type A card emulation
 EMVCo compliance
4. System Requirements
 Desktop or notebook computer with a working USB port
 One of the following Operating Systems：
– Windows
®
2000
– Windows
®
2003 Server x32/x64
– Windows
®
2008 Server x32/x64
– Windows Vista
™
x32/x64
– Windows
®
7 x32/x64
– Windows
®
10 x32/x64