Specifications

1. 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
2. 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
3. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤，並要求平台廠商於平台上標示
「本產品內含射頻模組 CC XX xx LP yyy Z z 」。
4. 「本公司於說明書中提供所有必要資訊以指導使用者/安裝者正確的安裝及操作」。
This module is intended for OEM integrators under the following conditions:
1. List of applicable rules: This module is certified pursuant to Part 15 rules sections(15.225)
and RSS-210.
2. Antennas: This module has been approved to operate with the antenna types listed below,
Frequency Band
Antenna Type
13.56MHz
Loop
3.The OEM integrator is still responsible for
a)ensuring that the end-user has no manual instructions to remove or install module
b)the FCC/ISED compliance requirement of the end product, which integrates this module.
4. Information on test modes and additional testing requirements
This module is restricted to integration into hosts for indoor use only.
This module has been approved under host configuration.
The separate approval is required for all other operating configurations, including different
antenna configurations
The information on how to configure test modes for host product evaluation for different
operational conditions for a stand-alone modular transmitter in a host, , versus with multiple,
simultaneously transmitting modules or other transmitters in a host can be found at KDB
Publication 996369 D04
5. Additional testing, Part 15 Subpart B disclaimer
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment
authorizations (e.g. SDoC) of the host product to be addressed by the integrator/manufacturer.
This module is only FCC authorized for the specific rules listed on the grant, and the host
product manufacturer is responsible for compliance to any other FCC rules that apply to the
host product as being Part 15 Subpart B compliant.
6. Limited module procedures: This module is limited to host model number: A140, A140G2;
Brand: Getac
7. Label and compliance information
Label of the end product:
FCC: