User's Manual

Power button
Volume up/
Setup
Volume down
Neck strap
Mic
Status LED
Micro-USB charging port
Touch
Downloading the Frenby App
● A Wi-Fi router supporting the 2.4 GHz and
802.11 b/g/n bands;
the 5 GHz band is not supported.
● A smartphone or tablet connected to a Wi-Fi
network.
● A smartphone or tablet running IOS 11.0 (or above)
or Android 6.0 (or above).
Connecting to a Wi-Fi Network
Change stored device settings
(Wi-Fi, Language)
1. Enter device setup mode.
2. Please enable Wi-Fi your smart phone.
3. Tap saved Frenby and select you want to change.
4. Press ‘Restart’ after changing the settings.
5. Use after Frenby says “Welcome”.
If you register multiple Wi-Fi, you can use it anywhere.
(You can store up to 8 Wi-Fi in Frenby)
※ If Frenby says “Can not find Wi-Fi”.
There are two ways to solve this:
1. Add new Wi-Fi.
2. Where Wi-Fi is already stored in Frenby:
Turn the power off and then on again.
The saved Wi-Fi is connected.
●Battery Check
1. Enable “Frenby Battery Checker” in Alexa app skill.
2. Say "Open Power Condition".
3. Frenby tells you the battery level.
Note [factory reset]
Press the volume up/down button at the same time
then turn on the power.
When two lights come in, release the button.
Contents: Frenby, lanyard, USB charging cable, user manual
● Frenby registration
(Please proceed after full charging.)
1. Enter device setup mode.
(Press the volume up button for more than 4 seconds)
2. Please enable Wi-Fi your smart phone.
3. Tap the “+” icon to add Frenby.
4. Sign in with your Amazon account to use Alexa voice
control.
If you do not have an Amazon account, create a new
account.
5. Use after Frenby says “Welcome”.