Operation Manual

Infresco Main Unit
Mains Voltage 230Vac +/-10% 50 Hz
Max load at 20°C ambient 4 kW
Power Consumption 50mA
PIR Set Time Period 5 Minutes
Temperature Set point 5°C to 25°C
Factory Set Temperature trip point 20°C
IP Rating 65
Gland Diameter Max Cable Entry 2.5mm²
2 Lamp Installation Must be fitted in Parallel
Operating Temperature -20°C to 30°C
IP Rating IP65
Max Unit Operating Temperature 65°C
Dimensions W=280mm D=200mm H=80mm
‘D’ inclusive of Glands
PIR Movement Sensor (optional)
Operating Voltage 12V dc
Direction 90°Adjustable
Detect 18 Metres
Outdoor Temperature Sensor (optional)
Dimensions W=115mm D=110mm H=55mm
WARNING
It is important that the Infresco IR is not mounted directly to any flammable material i.e. wood.
It is recommended that the heatsink be spaced off any the mounting wall using pillars to aid in
heat
dissipation
It is recommended that installation and maintenance of this equipment should be done with
reference to the current edition of the I.E.E. wiring regulations (BS7671) by suitably
qualified/trained personnel.
These regulations contain important requirements regarding safety of electrical equipment (for
International Standards refer to I.E.C/ directive IEC950).




UijthovenInfrarood
Nijverheidstraat31
4261TKWijkenAalburgTheNetherlands
Phone:0031416532724
Fax:0031416532719
E‐mail:[e-mail]

Web:www.terrastopper.nl
