I20
Table of Contents Drone Controller Drone Drone Drone Controller Controller Drone Drone IMPORTANT: Check your license requirements with the FAA before you fly. https://www.faa.
SPEEDBIRD mini I20E is equipped with optical flow and GPS and is capable of hovering and flying steadily indoors and outdoors. It is equipped with automatic return home and easy-to-use intelligent flight, such as Orbit Flight, Follow-Me and Waypoint Flight. It can shoot 2.5K HD video. The drone has functional buttons that can control various operations and settings of the drone and camera. The App will display real time HD images and flight information. Always put safety first when flying.
mini I20E User Guide Controller B Please purchase seperately ensure M G F S I L S
mini I20E User Guide P V J K U H K R to H J S OFF D ON K L H S T O C W /S S -On/Off Switch
Drone on the mini I20E. GPS Mode In GPS Mode, the drone achieves precise hovering by receiving GPS signals. If the GPS signal is weak, the drone will enter Fix-Altitude Mode or Optical Flow Position Mode.(Please refer to the status bar for specific status in the App.) When the GPS signal is weak, please land to in a safe place immediately to avoid an accidents. At the same time, please avoid flying in an area with a weak GPS signal or a narrow space to avoid accidents.
mini I20E User Guide Status Indicator Lights on Drone drone Status Indicator Light Definitions flash yellow quickly. I Drone yellow Drone yellow I Drone M Drone flash green quickly. I yellow I green. Indicator light flash red slowly. Indicator light flash red quickly.
mini I20E User Guide Mini I20E is equipped with a Auto Return Home function. It includes One key Return to Home , Return Home in low battery power and Return Home when signal has been lost. Under good GPS signal, drone will automatically fly back to home position and land automatically after pressing Return Home key. f c When this occurs all indicator lights change from yellow to green. One Key to Return Home To cancel return-home, press again and the drone will return to flight control mode.
mini I20E User Guide drone Usage Requirements of Optical Flow Positioning Please note, Optical Flow Positioning works when flying at altitude below 9.8ft. Measurement accuracy of the Optical Flow System (OFS) is easily affected by light intensity and texture of the surface. If the OPS fails the drone will automatically switch to fixed altitude mode. Below is a list of conditions that can cause failure to the OFS: 1. Flying fast at low altitude (below 16ft). 2.
mini I20E User Guide 5. Flying over moving objects such as upside of clouds, swaying trees or grasses, etc. 6. Flying over surfaces with rapid light changes. 7. Flying over extremely dark surfaces (Lux<10) or extremely bright surfaces (Lux>10,000). 8. Flying over very smooth surfaces. 9. Flying over surfaces with significant repeated textures such as same color brick. 10. Surfaces that are angled over 30 degrees. For best results with OPS, maintains moderate drone flying speed without rapid changes.
mini I20E User Guide D The Uniaxial gimbal provides a stable platform for the camera, ensuring the camera can shoot clear images HYHQ DW KLJK VSHHGV 7KH GHIDXOW VKRRWLQJ DQJOH LV ƕ WR ƕ 7KH DQJOH FDQ EH DGMXVWHG WKURXJK WKH GURQH handwheel or through APP camera interface. Please place drone on flat open ground for takeoff. Do not touch the gimbal after the power is turned on. The gimbal contains precision parts which may be easily damaged. Please handle with care.
mini I20E User Guide Drone Mini I20E USB to Type C Charging Prevent explosions by not squeezing or short-circuiting the battery. Do not remove the power cord from drone to prevent battery from short-circuiting. Do not disassemble battery or place near high temperatures or heated areas such as fires or electric heating devices. Check the power cord, shell and other parts regularly. If any damage occurs, repair damage before using. Charger is meant for indoor use only.
D Match corresponding propellers ( A with A and B with B), then turn screws clockwise to tighten them. (As shown in Pics 1-2). Turn screwdriver counterclockwise to remove the 2 screws and propellers. (As shown in pics. 3-4). Drone will not fly if propellers are installed incorrectly. Handle propeller blades carefully to prevent scratches. To ensure optimal safety and performance, only use the official ING propeller blades.
Controller Controller Function Flight Mode Switch Use the button on the right side of the controller to control GPS and flight mode. The “ ”on controller screen displays the current flight mode. Fixed altitude mode Controller Display Screen Return Home icon M Controller S Controller B Drone B Flying Distance(m) Fast/Slow Speed signal Flight Height(m) M M Gimbal Control Wheel Adjust the camera angle by moving the wheel on the drone to get a better photography experience.
mini I20E User Guide Photo/Video Mode Press the “ ” button on the controller to take a photo and the “ ” button will flash once. Press the “ ” button on the controller for 3 seconds to take a video and the “ ” button will flash slowly continuously. Hold the “ ” button for 2 seconds again to stop shooting video. Notes: 2.5K HD photos and videos cannot be saved without a Micro Memory Card (Class 10-UHS-II). If the Micro Memory Card is inserted incorrectly, the drone won't be able to take photos or video.
mini I20E User Guide Drone Low Battery Warning 1. When the battery level drops to level 2,the indicator light on the drone will quickly flash red and the battery icon on the controller screen will show " " . If the drone is flying at an altitude higher than 98ft or a distance further than 328ft, it will automatically return to the last saved home point. 2.
mini I20E User Guide Drone Communication Range Keep the drone in front of the controller and prevent any obstacles from appearing between them. Controller Joystick Mode F L S L F S Joystick Mode Switch 1. Press and hold the unlock button on the controller, then turn it on to activate signal matching mode. 2. Hold the " " button for 3 seconds and the controller mode will switch to the other mode. The current controller mode will be displayed on the screen with Mode 2 being the default mode.
mini I20E User Guide 3. Rotate and fix support board in to place (Pic.3). 4. Move components up and down to adjust the size to fit your phone. (Pic.4).
Scan Code To Download APP Search M RC PRO in the Apple App Store or scan the QR code to download and install it. For Android users, scan the QR code to download and install it. MJXRC.NET App Store Connection Instructions Go to the Settings app on your phone, then turn on the WiFi and connect to Drone4G_***** and wait for the word "Connected" to appear.Once connected, the app can be opened.
Flight Requirements 1. Do not fly in bad weather, such as strong wind, snow, rain, fog, etc. 2. Choose an open place without tall buildings around to fly. Buildings that use a lot of steel bars will affect the work of the compass and block the GPS signal, causing poor positioning of the drone or even an inability to locate the drone. 3. When flying, keep the drone in sight, stay away from obstacles such as crowds, water, etc. 4.
mini I20E User Guide As long as the controller and drone have been successfully matched, there is no need to rematch the signal after each use unless you have matched with another controller and/or drone. When matching the signal, make sure no other controller or drones have been turned on nearby, this will interfere with signal matching. Gyroscope Calibration After successfully signal matching, place the drone horizontally on the ground.
mini I20E User Guide Two Steps Of Geomagnetic Calibration Once horizontal calibration begins, the front and rear indicator lights will flash yellow. Place the drone as shown below and rotate it 3 times horizontally until the front and rear indicator lights quickly flash green. Once this happens, horizontal calibration will be complete. Place the drone as shown below, rotate it 3 times vertically, until the front and rear indicator lights stay red. Once this happens, vertical calibration will be complete.
mini I20E User Guide Unlock/Lock the Drone Unlock the Drone Press the lock button, once the motor starts, the drone will be unlocked. Lock the Drone Method 1: After the drone has landed, move the throttle to the bottom for 3 seconds to stop the motor and lock the drone. Method 2: The drone will lock automatically after 15 seconds of non-use. Emergency Stop: When the drone is flying at a distance/altitude within 16ft, press the lock button “ ” for 3 seconds to stop it.
mini I20E User Guide The Steps of Basic Flight 1. Place the drone on a flat and open space with the user facing the rear of the drone. 2. Turn on the controller and the drone. 3. Match the signal of the controller and drone, and complete the initialization of the drone. 4. Open the M RC PRO APP, connect the phone to the mini I20E, and enter into the camera interface. 5. Unlock the drone. 6. Slowly move the throttle stick up and the drone will take off smoothly.
Drone Drone PLQL , ( 0.57lbs 5.5x3.4x2.2 inches (LxWxH) 12.2x10.6x2.2 inches (LxWxH) 9 inches 10ft./s 6.6ft./s 25mph (394ft) 32-104 F 1ft 2ft Hz Controller IHHW 32-104 F pcs(not induded) Drone Battery 0.
mini I20E User Guide
mini I20E User Guide Drone *1 Controller *1 Drone Battery *1 I20 I20 IMPORTANT INFORMATION Support Toll-free Customer Support: 888-737-9984 E-mail support: ing.support@beaninformationlogistics.com Hours of Operation: Monday-Friday 8:30AM – 3:30PM PST (closed holidays) Safety & Handling Use of an AC Adapter / Charger wire other than the one supplied with this product may result in overheating the battery, damaging the product and potentially becoming a fire hazard. WiiRobot Co.,Ltd.
mini I20E User Guide operate and control it in drone the Remote control drone's have an uncertain flight speed and state during flight and is potentially dangerous.
mini I20E User Guide This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
