User's Guide

Tips
1. Perform a pre-flight inspection.
2. Select the appropriate gimbal camera angle.
3. Fly and take photo in a good weather without wind.
4. Perform a test flight to create a planned route and find a place to take a view of.
5. Push the joystick as smoothly as possible to ensure the drone flies smoothly.
The Steps of Basic Flight
1. Place the drone on a flat and open space with the user facing the rear of the drone.
2. Turn on the controller and the drone.
3. Match the signal of the controller and drone, and complete the initialization of the drone.
4. Open the M RC PRO APP, connect the phone to the I63E, and enter into the camera
interface.
5. Unlock the drone.
6. Slowly move the throttle stick up and the drone will take off smoothly. Use the left and right joysticks
to control the drone.
7. Pull down the throttle stick to lower the drone.
8. After landing, pull the throttle stick to the lowest position and hold it for more than 3 seconds until
the motor stops.
9. After stopping, turn off the drone and the controller.
Basic Flight
As flight safety is very important to you, those around you and the environment, please
read the user guide carefully.
I63E User Guide
-22-