FIT111 Quick start and installation guide www.ingenico.
Contents 1_Introduction 3 2_Recomendation 5 2_1 Safety 5 2_2 Security of your terminal 6 2_3 Integration (see installation guide*) 7 2_4 Approvals and markings 7 2_5 IC Statements 8 2_6 FCC Statement 9 3_Maintenance 10 3_1 Transport and storage 3_2 Environment (WEEE, Batteries and Packaging) Save this information Leaflet and file in a safe place ! FIT111 900023725 R11 000 03/0317 2 Copyright© 2017 Ingenico All rights reserved
1_Introduction Thank you for choosing a payment terminal Ingenico. We recommend you to read carefully this installation guide: It gives you the necessary information about safety precautions, unpacking, installation, and maintenance of your terminal. Danke, dass Sie sich für einen Zahlungsterminal Ingenico entschieden haben. Wir empfehlen Ihnen, diese Installationsanleitung sorgfältig durchzulesen.
The power sources should comply with Standards IEC 60950-1: 2005 (2nd Edition) +/A1:2009 +/A2:2013 and EN 60950-1: 2006 +/A11:2009 +/A1:2010 +/A12:2011 +/A2:2013. Moreover, they should be Safety Extra-Low Voltage circuits and Power Limited Sources according to clauses 2.2 and 2.5 of these standards. FIT111 power ratings: 5 V max 500mA Die Stromquellen sollten den Normen IEC 60950-1: 2005 (Ausgabe 2) +/A1:2009 +/A2:2013 und EN 60950-1: 2006 +/A11:2009 +/ A1:2010 +/A12:2011 +/A2:2013 entsprechen.
2_Recomendation 2_1 Safety Power on/Power down To power on or power down the FIT111 connect or disconnect the USB cable. Starten /stoppen Für starten oder stoppen FIT111 anschließen oder abziehen Kabel USB. Mise en marche / Arrêt Pour allumer ou éteindre l’FIT111 connectez ou débranchez le câble USB. Lithium battery The FIT111 is fitted with a lithium battery which is not accessible to the user. Only a qualified technician may be authorized to open the unit and change this component.
Connections to external equipment and circuits All external circuits and equipment connected to FIT111 should be Safety Extra-Low Voltage circuits and be Limited power sources within the meaning of sections 2.2 and 2.5 of Standards IEC 60950-1: 2005 +/ A1:2009 +/A2:2013 and EN 60950-1: 2006 +/A11:2009 +/A1:2010 +/ A12:2011 +/A2:2013.
2_3 Integration (see installation guide*) See installation guide *. 2_4 Approvals and markings Mandatory conformity marking for products sold within the European Economic Area (EEA).
2_5 IC Statements This class (B) digital apparatus complies with Canadian ICES-003. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
2_6 FCC Statement FCC standard compliance marking certifies that the product stipulated below: FIT111 conforms to the following harmonized standards : part 15 subpart B of the FCC rules This class (B) digital apparatus complies with Canadian ICES-003. Information to users: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
3_Maintenance ATTENTION Before making any operations of maintenance in the terminal, make sure that power supply is disconnected. ACHTUNG Stellen Sie vor der Durchführung von Wartungsarbeiten am Terminal sicher, dass die Stromzufuhr abgeschaltet ist. ATTENTION Avant toute opération de maintenance du terminal, s’assurer que l’alimentation électrique est déconnectée. Cleaning of the terminal First of all, unplug all the wires from the terminal.
Der Terminal sollte ausgesetzt werden. keiner direkten Sonnenbestrahlung Les règles de bonne pratique pour le nettoyage du terminal sont les suivantes : Utiliser un chiffon doux très légèrement imbibé d’eau savonneuse pour nettoyer l’extérieur du terminal. Ne pas nettoyer les connexions électriques. Ne jamais utiliser de solvants, détergents ou produits abrasifs : ces produits peuvent endommager les contacts électriques ou les parties plastiques.
3_2 Environment (WEEE, Batteries and Packaging) This product is labeled in accordance with European Directives 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE) and 2006/66/EC concerning Batteries and Accumulators. Those provisions are requiring producers and manufacturers to become liable for take-back, treatment and recycling upon end of life of equipment and batteries.
“This Document is Copyright © 2015 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO.