User's Manual
Table Of Contents
- Introduction
- General Characteristics
- Feature Details
- Feature Descriptions
- Applications
- Mechanical Design Overview
- Mechanical Dimensions
- Climatic and Mechanical Environment Testing Compliance
- Introduction
- 50-Pin Connector Interfaces
- Flashing LED
- SIM Interface
- RF Interface
- DTE/DCE Interface Rates
- Serial Test/Demo Board Components
- Serial Test/Demo Board Block Diagram
- General Guidelines for the Use of the ModemModule
- Reference Documents
- Related Manuals
- Additional Information
- Safety Precautions
- Regulatory Standards Compliance
- Where to Find SMD Connectors
- GSM Antenna
- SIM Card Holder
- LIST OF TABLES
Chapter 3 – Electrical Characteristics
Wireless ModemModule MTMMC-G-F1 and MTMMC-G-F2 Developer’s Guide 18
Table 3-5: Power Consumption in GSM-only 1800 & 1900 MHz modes @25 degrees C
Conditions I
NOM
I
MAX
+5V
During TX bursts @1W 635 mA 800 mA
+5V
Average @1W 260 mA 280 mA
+5V
Average @ 0.25W 150 mA 170 mA
+5V
Average idle mode 20 mA 22 mA
Table 3-6: Power Consumption in EGSM/GPRS 900 MHz and GSM/GRPS 850 MHz Mode
Class 10
Conditions I
NOM
I
MAX
+5V
During TX bursts @PcI5 1.7 A peak 2.0 A peak
+5V
During RX bursts 75 mA peak 80 mA peak
+5V
Average 1Rx/1Tx @PcI5 270 mA 320 mA
+5V
Average 1Rx/1Tx@PcI8 180 mA 200 mA
+5V
Average idle mode
100 mA 300 mA
+5V
Average GPRS CI 10
(3Rx/2Tx) @PcI5
540 mA 640 mA
+5V
Average GPRS CI 10
(3Rx/2Tx) @PcI8
360 mA 400 ma
+5V
Average Idle mode 2,2 mA 3 Ma
Power Control Level: PcI5=2W typ.; PcI8=0,5W typ.
Table 3-7: Power Consumption in GSM/GRPS 1800 MHz and GSM/GRPS 1900 MHz
Class 10
Conditions I
NOM
I
MAX
+5V
During TX bursts @PcI0 1.3 A peak 1.7 A peak
+5V
During RX bursts 75 mA peak 80 mA peak
+5V
Average 1Rx/1Tx @PcI5 240 mA 270 mA
+5V
Average 1Rx/1Tx@PcI8 150 mA 180 mA
+5V
Average idle mode
100 mA 300 mA
+5V
Average GPRS CI 10
(3Rx/2Tx) @PcI5
480 mA 540 mA
+5V
Average GPRS CI 10
(3Rx/2Tx) @PcI8
300 mA 360 Ma
+5V
Average Idle mode 2,2 mA 3 Ma
Power Control Level: PcI0=1W typ; PcI3=0,25W typ