Installation Guide

1. Ingenico 7770 description:
The i7770 is a portable (Bluetooth technology) point of
sale electronic payment terminal designed to process
debit, credit and smart card purchases.
The i7770 features an easy loading high-speed printer, a
graphic display, back lit keyboard and easily accessible
battery (for fast installation and replacement) with
intelligent management of battery charging. The i7770 is
environmentally friendly with light packaging, recyclable
plastic and non-polluting batteries.
The i7770 communicates with the acquirer through its
base via the telephone network. The hand held terminal
and the base communicate through the Bluetooth radio
link, or via direct contact. A network can be set up, with
one base managing up to 7 terminals at the same time.
The base allows connection to various peripherals
through its RS-232 ports.
The i7770 features a secure, multi-application operating
system (UNICAPT
TM
technology) permitting several
applications to run independently on the same terminal.
1.1. Display:
A 4 line x 16 character LCD graphic display, with a
back light.
1.2. Keypad:
18 keys, with a back light. The special function keys are:
• Programmable function keys <F1>, <F2> and <F3>
for navigation and access to various i7770 functions
and the system and application menus.
• Paper Feed key is used for a printer paper feed
(20mm).
• The green <ENTER> key confirms the data entered or
displayed. It also powers on the i7770.
• The red <CAN> key cancels the current function and
returns the terminal to the idle state.
• The yellow <CORR> key corrects invalid data entry.
• The blue <ADMIN> key is used to access the terminal
administration function menu.
1.3. Magnetic Stripe Card Reader:
i7770 features a bi-directional reader capable of reading
tracks 1 and 2 simultaneously. The reader is located on the
right-hand side of the i7770. The card can be swiped from
the bottom to the top, or from the top to the bottom. The
magnetic stripe on the card has to face down and point
toward the i7770. The card has to be swiped at uniform speed
and pressure, ensuring that the card remains in contact with
the bottom of the track throughout the entire swipe action.
1.4. Smart Card Reader:
Insert the smart card horizontally into the slot on the front of
the i7770, the microchip facing up, and leave it in the reader
throughout the transaction.
The i7770 has EMV level 1&2 approvals and complies with
the ISO 7816, Sync and Async T=1 & T=0.
1.5. Printer:
The i7770 integrates a quiet, high speed, “easy-load” style
thermal printer with graphics capability.
1.6. Battery:
Rechargeable and easily replaceable intelligent Ni-MH or Li-
Ion battery pack.
1.7. SAM Connectors:
Three SAM card connectors are located on the bottom of the
i7770. The SAM (Secure Access Module) supports
smart card chips necessary for applications such as
loyalty.
1.8. The Base
The i7770 communicates with its base via Bluetooth radio
link, or through the contacts (connect mode) which is useful
when loading large amounts of data, or when a Bluetooth
link is unavailable.
The base provides recharging for the battery pack, and
includes the communication ports:
- COM2 and COM1/3:
Two RS-232 serial communication links for customer
applications download and for the communication with
external peripherals (speed 300 to 115200 bps). The
COM1/3 provides power for external devices.
- DIAL LINE and TELEPHONE Ports:
A V34 / 33600 bps (asynch. and synchr.) modem that
supports fast connect and busy line detection.
The telephone port allows sharing of the telephone line with
other devices such as a fax machine or telephone.
2. Ingenico 7770 Packaging Content:
1. The i7770 hand held terminal.
2. The i7770 battery pack.
3. Thermal printer paper, one roll.
4. The i7770 base (optional, radio or charging).
5. The power supply (optional, with the base only).
6.
The phone cable (optional, with the radio base only).
7. The cable securing plate and a screw (optional, with the
base only).
8. This installation guide.
3. Installation procedure:
Place the i7770 base on a clear, flat surface near an electrical
and telephone sockets. The ideal location is in the center of
the zone to be covered with a large open area around. The
antenna is inside, on the left side of the base.
The i7770 hand held and the base must be protected from
high temperature, vibrations, dust, dampness and
electromagnetic radiation (computer screen, microwave
oven, anti-theft barrier etc.). Equipment such as cordless and
cellular phones can emit harmonics that could disturb the
terminal at 2.45 GHz.
Do not place the base near a great vertical metal plane (doors
of refrigerator, large home appliances, vending machines).
Ensure the base or the terminal is more than 3 m (around 10
feet) from any microwave oven in use.
Do not place the hand held terminal on a metal surface.
Do not put your hand under the printer during
communication, as the range is greatly reduced.
If there are several radio bases installed, position them at
least 2 meters (around 6.5 feet) from each other.
Ensure that the terminal is seated securely on the base.
Operating temperature ................................+5°C to +40°C
Humidity ........................ 20% to 90% without condensation
Storage temperature ....................................-10°C to +60°C
3.1. Battery Set up and Charging:
The i7770 is supplied with a removable rechargeable Ni-MH
or Li-Ion battery. Only use the battery pack supplied with
your terminal.
The i7770 battery is built with circuitry for intelligent
battery management. To charge the battery, place the hand-
held on the i7770 base. Ensure the base is powered up. Note
that the battery will recharge only if necessary. Furthermore,
the battery has internal temperature control so it never
exceeds 50°C (122°F).
Ensure that the terminal is seated securely on the base.
Use the power adapter supplied with the i7770. Many
adapters can appear similar and will plug into the i7770 base
but will not work properly causing erratic behavior, poor
charging or even damage to the unit.
The i7770 with a fully charged battery can execute up to 200
transactions (depending on the ticket size and transaction
duration).
The i7770 displays the battery status:
1 bar represents 25 % of full capacity,
2 bars represent 50 % of full capacity,
3 bars represent 75 % of full capacity,
4 bars represent 100 % of full capacity.
Charge the battery for 3 hours when it is used the first time.
Full charging time after the first time is 2 hours. A new
battery will benefit from an initial "conditioning". The first 3
times the battery is used, allow the battery to fully discharge
and then charge it to its full capacity.
Always charge the battery at the room temperature.
Do not place the i7770 terminal back on its base after each
transaction. Frequent and short battery charging may damage
the battery and reduce its lifetime.
Every one to two months allow the i7770 to show the low
battery warning and shut down. Then charge the battery to
its full capacity. This will prolong the battery life.
Batteries that sit idle for extended periods of time without
charging, will gradually self-discharge.
3.2. Installing the Battery:
Leave the i7770 handheld terminal off its base and wait until
it turns itself off before handling the battery pack.
Hold the battery with the connectors facing downwards, do
not touch the contacts on the battery or the i7770.
Insert the two plastic teeth in the gaps on the i7770 case,
place the battery in the cavity and press the handle until a
click is heard.
3.3. SAM Installation:
Wait till the i7770 turns off and remove its battery. Unlock
the SAM connector by sliding the metallic latch in the
direction of the OPEN arrow. Lift the SAM cover upward
and insert the chip as shown on the picture below. Swing the
cover down and slide the latch into locked position (the
LOCK arrow). Put the battery on the i7770.
3.4. Connections:
Turn the i7770 radio base off when connecting peripherals.
The power supply must be connected last, only after all the
other connections are made.
Navigation keys
Paper
Compartment
CANCEL
Key
CORR Key
ENTER Key
Base Contacts
Paper
Feed Key
Magnetic
Stripe Card
Reader
Smart Card
Reader
Green Power
Indicator Light