User's Manual

6.3. Card insertion

6.3.1. Swiping a card

Slide the card in the reader with magnetic

strip facing left

Swipe the card with constant speed, not

too slow not too fast, to maximize the

reading and avoid annoying repetitions.

6.3.2. Inserting a chip card

Chip Cards should be inserted into the

card reader as illustrated with the chip

facing up

6.3.3. Inserting a chip card in second reader

(Optional)

Is located on back of the terminal.

Insert the card up side down, magnetic strip

visible. (chip no visible)

6.3.4. Reading Contactless (Optional)

Bring the card quickly up to the active zone above the display (at about 1cm). Keep

the card close to the display during the transaction

Your contactless terminal has a row of four status lights that are visible on display.

When a contactless transaction is started the first (left hand) status light will be lit

steadily; this indicates that the

contactless display is in use but a card is

not being read.

When a contactless card is presented to

the contactless active zone during a

transaction, the second, third and

fourth status lights will be lit in turn.

The card read is successful when all four

status lights are lit and the confirmation

tone is heard.

Green

lights

Contact’less

Active Zone