User's Manual

4. Installation and connection

4.1. Positioning the terminal

Install the terminal on a flat surface, with an easy access to an electrical outlet and telephone

line. Place the terminal away from any heat source and protected from dust, vibrations and

electromagnetic radiations (away from video terminals, PC, anti-shoplifting barriers ...).

Operating conditions

Ambient temperature

from +5°C to +40°C

Max relative humidity

85% at +40°C

Storage conditions

Storage temperature

-20°C, +55°C

Max relative humidity

85% at +55°C

4.2. Connections

All connections are on the rear of the terminal protected by a cover.

* according to the model

4.3. Installing the iCT220/iCT250 – Cable fixing

4.3.1. Opening the cable cover

Unclip the cover by pushing simultaneously on the clips 1 with your nails finger as

shown on the figure here below.

Lift the cover rearward to remove it, as shown by arrows on the figure.

Serial Link RS232

Telephone

USB Slave

Ethernet Link (Optional)*

USB Host

Second Serial Link RS232

(Optional)*

Power Supply