User Guide iMP 3xx Ingenico – 190-192 Avenue Charles de Gaulle 92200 Neuilly sur Seine Tél.
Contents 1. Introduction __________________________________________________ 4 2. Unpacking ___________________________________________________ 5 3. Recommendations_____________________________________________ 6 3.1. Security _____________________________________________________________6 3.2. Security of your terminal _______________________________________________6 3.3. EC standard compliance marking_________________________________________ 7 3.4. FCC & IC Compliance.
6. Maintenance _________________________________________________18 Cleaning of the terminal___________________________________________________ 18 6.1. Transport and storage ________________________________________________ 18 6.2. Troubleshooting _____________________________________________________ 18 6.3.
1. Introduction Thank you for choosing a payment terminal Ingenico. We recommend you to read carefully this installation guide: It gives you the necessary information about safety precautions, unpacking, installation, and maintenance of your terminal. WARRANTY / SECURITY To benefit from the guarantee-related product, and to respect the security, we ask you to use only accessories delivered in box with the product, entrusting maintenance operations only to an authorized person.
2. Unpacking ADVICE Carefully preserve the packaging of the IMP3XX. It must be re-used whenever the terminal is shipped.
3. Recommendations 3.1. Security Lithium battery The IMP3XX is fitted with a lithium battery which is not accessible to the user. Only a qualified technician may be authorized to open the unit and change this component. Battery • • • • IMP3XX is fitted with battery specially designed for this terminal. Only use the appropriate chargers and batteries listed in the Ingenico’s catalogue. Do not short-circuit the battery. Do not attempt to open the battery container.
3.3. EC standard compliance marking EC standard compliance marking certifies that the product stipulated below: iSMP.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 15.19 (a) (3) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation of the device.
3.5.
4. Installation and connection 4.1. Functional description 9 Graphic display Navigation keys in the menus Magnetic stripe reader Smart card reader Charge pads Micro USB connector 2D bar code reader iPhone ON/OFF key 9 Bar code scanner activation buttons 4.2. Battery insertion CAUTION : Before starting, switch off the terminal and the iPhone 4 and disconnect USB cable if fitted • • Remove iPhone 4 from iMP3xx .
• Insert contact side first Warning There is a risk of explosion if the battery is incorrectly replaced or is placed in a fire. Please dispose of used batteries following instructions in section 6.3. 4.3. iPhone 4 insertion CAUTION : Before starting, switch off the terminal and the iPhone 4 and disconnect USB cable • Pull the top side cover and rotate as shown on drawing below. • Insert carefully iPhone 4 bottom side first.
• Close iPhone compartment as following. 4.4. Charging iMP3XX • Before using iMP3xx for the first time, you need to charge it for about 4 hours. • After that, you can charge the iMP3xx 3 hours to recharge the battery to full capacity. • Charge the iMP3xx using the power cable or the docking station (provided separately as an accessory).
The iMP3xx has been designed to be able to charge the i-phone/i-pod touch while operating. A charging dock is available as a separate accessory. It connects on the charging pads, and features guiding in the cradle to ensure connection. The iMP3xx can also be charged using the charger provided in the package. The charger has to be plugged on the micro-USB connector. Please refer to section 2.1. Charging pads (used with charging dock only) Micro-USB connector 4.5.
USB Connector CAUTION Use only Ingenico cable or accessory not to void warranty. 4.7.2. Cable disconnection • On specific cable, an handle helps the disconnection 4.7.3.
5. Daily use 5.1. Getting started with iMP3xx 1) Install the iPhone4 on the iMP3xx as described in section 4 2) Switch the iMP3xx payment module by pressing the green key 3) Follow the iMP3xx initialization procedure. This procedure differs from a customer to another. Please refer to your payment service provider. 4) Business payment application running on the iPhone will be customer specific. Please refer to you business application provider. 5.2.
Keep pressing the keys as long as necessary. 5.4. Barcode reader Barcode is activated with the 2 side keys as shown below.
5.5.2. Inserting a chip card • Chip Cards should be inserted into your terminal as illustrated with the chip facing up and into the card reader 5.5.3. Reading Contactless (Optional) • Bring the card firmly up to the active zone above the display (at about 1cm). Keep the card close to the display during the transaction Your contactless terminal has a row of four status lights that are visible on display.
6. Maintenance ATTENTION Before making any operations of maintenance in the terminal, make sure that power supply is disconnected. Cleaning of the terminal First of all, unplug all the wires from the terminal. Good rules for proper cleaning of the terminal are: • • • • • Use a soft cloth that is very slightly soaked with soapy water to clean the outside of the terminal. Do not clean the electrical connections.
6.3. End of life The product belongs to the family of electrical and electronic equipment. Therefore, it is subjected to the WEEE directive which requires the collection and the recycling at the end of life product. The Ingenico products present the symbol for the marking of electrical and electronic equipment as required by the WEEE Directive.
“This Document is Copyright © 2010 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO.
