User's Manual

Indicates a device’s compliance with applicable Australian

Communications and Media Authority (ACMA) technical

standards—that is, for telecommunications, radio

communications, EMC and EME

Indicates that the product has been tested against EMC and

safety standards for Taiwan market

Compulsory safety mark for many products imported, sold or used

in the Chinese market

Indicating a power supply meets the level V energy efficiency

requirements.

Indicates that when the end-user wishes to discard this product, it

must be sent to separate collection facilities for recovery and

recycling

Indicates that the product is intended for indoor use only

Indicates that the product operates with a continuous voltage.

This symbol is followed by the ratings (voltage and current for

instance)

3.3. EC standard compliance

EC standard compliance marking certifies that the product stipulated below:

iSMP3 associated to iMP400

Conforms to the following harmonized standards:

 Safety standards:

- EN 60950-1:2006/ A1:2010/A11 :2009/A12 :2011

- IEC 60950-1 :2

ed./A1:2009/A2 :2013

 EMC standards

- EN 301 489-1 v1.9.2/ EN 301 489-17 v2.1.1

- EN 55022:2006/A1:2007/EN 55024:2011

 Radio

- ETSI EN 300 328 v1.8.1

The CE marking indicates IMP400 complies with the requirements of European

Directive 1999/5/EC of 9 March 1999 on Radio and Telecommunications Terminal

Equipment for:

o The protection of the health and the safety of the user and any other person.

o The protection requirements with respect to electromagnetic compatibility.

And complies with harmonised standards listed above.