User's Guide

iWL2xx Wireless Series • 5/32 Copyright © 2011 Ingenico
900003061 R11 000 05/1122 All rights reserved
2. Presentation
2.1. Content of the box
2.1.1. Terminal
2.1.2. Base ( optional )
WARNING
The power supply unit provided with your equipment is specially designed for Ingenico
terminals. Do not use any other power supply. The use of a power supply with apparently
similar voltage/current characteristics may damage your terminal.
ADVICE
Keep the packaging. It must be re-used when ever the terminal is shipped.
IWL2XX terminal unit
equipped with a paper roll
Base
A power supply unit that
connect the base to the
mains network
A battery pack disconnected
A telephone cable
(with base modem)
Power
supply
unit (PSU)
(charging from the micro-USB
port of the terminal )
When the terminal is delivered
with a base, this PSU is
replaced by a base PSU
A user’s guide
iWL2xx Wireless Series • 6/32 Copyright © 2011 Ingenico
900003061 R11 000 05/1122 All rights reserved
2.2. Overview of the iWL2XX
Base
Weight About 150g
Dimensions (L x w x h) 140,7x87,7x45 mm
Power supply unit
Weight About 100g
2pole sockets 1A (traveller power supply) or 1 A (base power supply)
Power supply units are specially fitted for INGENICO terminals.
Weight (without paper
roll nor battery)
290g for the R25 model and 310g for the R40 model
Dimensions (L x w x h) 150x76x44mmfor the R25 model and 164,5x76x53,5mm for the R40 model
Mains network 100-240VAC / 50-60 Hz - Class II equipment
Connections on terminal Micro USB AB serial link
Backlit
keyboard
Smart
card reader
Easy loading printer Large graphic display
Magnetic card
reader
Compartment where are located :
• the battery pack
• the SAM1/SAM2/SIM connector
• the module microSD
• the 2
nd
Smart card reader
Terminal unit
E
xternal
links
E
xternal
links
Base unit