User's Guide

ManualsBrandsINGENI ManualsElectronics3G and Contactless Point of Sales terminal

iWL2xx Wireless Series • 9/32

900003061 R11 000 05/1122

Contactless (optional)

• Bring the card firmly up to the active zone. Keep the

card close to the reader during the transaction

•

The 4 LEDs indicate transaction processing (as shown

on the pictu re) . On color screen terminal virtual LEDs

are displayed.

The terminal behavior for the cardholder may depend on:

• The termin al environment

• Local usage (language…)

3.4. Installing the terminal on the base

Connecting the terminal on the base

Place the iWL2XX between the flanges on its base so that the contacts of the iWL2XX

engage on the contacts provided on the base (see picture below).

Using the modem base (if modem fitted on your base)

Once installed, the base modem is designed to always be plugged into the mains network

and be connected to a telephone line. The telephone line should not be shared.

The portable may be placed back on its base after each transaction. It must be placed on its

modem base when telephone network is used for : authorization request, remote

collection, downloading.

4 leds

(B&W display only)

Active

zone

iWL2xx Wireless Series • 10/32

900003061 R11 000 05/1122

4. Installation

4.1. Recommendations

Location of the iWL2xx

Place the base on flat surface near an electric socket and, if modem option, a telephone

socket. The terminal should be placed far from any very hot zones, protected from

vibrations, dust, damp and electromagnetic radiation (computer screen, anti-theft barrier

etc.).

The terminal must not be fixed to a counter in such a way that a user cannot pick up the

terminal and use his/her body to conceal the PIN when it is requested.

Operating conditions

Ambiant temperature from -10°C to +40°C

Max relative humidity 85% at +40°C

Ch arging conditions

Ambiant temperature from 0°C to +40°C

Storage conditions

Ambiant temperature from -20°C to +55°C

Max relative humidity 85% at +55°C

4.2. Terminal connections

• There is an USB connector (microAB) on the left side of the iWL2XX Wireless

terminal (see below picture). This connector manages Host or Slave connexions.

CAUTION :

Do not turn USB protection shell down side. Turn shell in clockwise direction to uncap

connector. And reverse to cap back

*MicroAB connector durability : up to 10000 mating cycles

• The termin al supports USB Keys with FAT16 or FAT32

• The USB Key has to be used with an USB adapter (refers to accessories section)

USB (microAB)

Connector used for PC, travel

charger adapter, USB Key, etc…)