User Guide

Move 3500

900019007 R11 000 06/0117

4_5_3 Charging the battery

When does the battery need to be charged?

On initial start up, charge the battery for 16 hours under the

environmental conditions stated above

When used daily, the terminal recharges its batteries each time it

is placed on its base . Charging is automatic

When used with a terminal power supply: connect the power

supply to Move/3500 power connector.

How does the battery need to be charged?

The environment in which the charge takes place inuences

battery lifetime and autonomy (number of transactions)

The optimal conditions are as follows:

/ Charging away from any external heat source (radiator, sun,

enclosed area…)

/ The optimal temperature is between +15°C and +25°C

How can the battery be charged?

Using the base

Place the terminal on its base

Check if the battery symbol is ashing or moving (=battery

charging).

Using the terminal power supply (the terminal is out of its base)

Connect the terminal power supply unit to the terminal MicroAB

connector located on the left side of the terminal.

Connect the power supply unit to the power supply mains

network

Check to see if the battery symbol is ashing or moving(=battery

charging)