User Guide

Move 3500

900019007 R11 000 06/0117

ADVICE

If you insert a new R40 paper roll, tear off the rst length

(one complete turn to avoid printing on adhesive tape

footprint).

5_Recommendations

5_1 Safety

Disconnect the Move/3500 power supply block adapter from

the electrical mains network.

Powering down the Move/3500 :

The Move/3500 is tted with an internal lithium cell which can

only be accessed by a qualied technician.

Lithium cell

Move/3500 is tted with battery specially designed for this

terminal.

Battery

Only use the appropriate chargers and batteries listed in the

Ingenico’s catalogue.

Do not short-circuit the battery.

Do not attempt to open the battery container.

Used batteries must be disposed of at the appropriates sites.

WARNING

There is a risk of explosion if the battery is incorrectly re-

placed or is placed in a re.

The electrical outlet must meet the following criteria :

Electrical power outlet

Must be installed near the equipment and easily accessible;

Must meet standards and regulations in the country where

used;

For type A plug, the protection of the installation must be

set to 20 A.