User's Manual

Page 5
And, for the whole range, complies with the European approval specification on connecting terminals
with DTMF dialling to the Public Switched Telephone Network (Council Decision 1998/482/EC, Council
Decision 1999/303/EC).
ETSI ES 203021
ETSI TR 103000
The product supplied is designed to interwork with the following European analogue Public Switched
Telephone Networks:
Austria, Belgium, Denmark, Finland, France , Germany, Greece, Iceland, Ireland, Italy, Liechtenstein,
The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom.
WEEE Directive
The product belongs to the family of electrical and electronic equipment. Therefore it is subjected to
the WEEE Directive which requires the collection and recycling at the end of the life of the product.
Ingenico products present the symbol for the marking of electrical and electronic equipment as
required by the WEEE Directive.
The crossed through wheeled bin printed on the product gives information about the
requirement not to dispose of WEEE as unsorted municipal waste and to collect such WEEE
separately.
To ensure that the product is collected and recycled with respect to the environment, you must contact
your supplier (contact the Ingenico local office or the commercial head office in charge of your country
on www.ingenico.com <<contact us>> page).The abandonment or uncontrolled disposal of waste can
harm the environment and human health.
So, by recycling your product in a responsible manner you contribute to the preservation of natural
resources and the protection of human health.
Batteries
If your product contains batteries they must be disposed of at the appropriate collection points.
3. Declaration of Conformity
The CE marking indicates that the product supplied complies with the basic requirements of European
Directive 1999/5/CE known as the R&TTE Directive concerning RF equipment and telecommunications
terminals with respect to:
• The protection of the health and safety of the user and any other person.
• The protection requirements with respect to electromagnetic compatibility.
and complies with the following harmonised standards:
IEC/EN 60950 1 Issued Dec 2001 Electrical safety of data processing
equipment
EN 55022 Issued 1998/A1-2000/A2-2003 Radio electric disturbance characteristics
limits and measurement methods
EN 55024 Issued 1998/A1-2000/A2-2003 Immunity characteristics limits and
measurement methods
The crossed through wheeled bin printed on the product gives information about the
requirement not to dispose of WEEE as unsorted municipal waste and to collect such WEEE
separately.