User's Manual
Table Of Contents
- Contents
- 1 Overview
- 2 DC and RF Characteristics
- 3 Electrical Interface
- 4 Safety Considerations
- 5 Regulatory Considerations
- 6 Installation of TRN-2012/TRN-2113 Boards
- 7 Operating and Troubleshooting
- 8 Provisioning
- Appendix A Provisioning Process and Work Flow
- Appendix B Test Mode Interface
- B.1 Normal Operating Mode 0
- B.2 Non-Persistent Idle / Factory Test Mode 1
- B.3 Persistent Idle / Factory Test Mode 2
- B.4 Non-Persistent Node RF Test Mode 3
- B.5 Persistent Node RF Test Mode 4
- B.6 Non-Persistent Manufacturing Cal Mode 5
- B.7 Persistent Manufacturing Cal Mode 6
- B.8 Non-Persistent Meter Diagnostic Mode (Not Yet Implemented)
- B.9 Setting eMCM to Test Mode 1 - Non-Persistent Idle Factory Test Mode
- B.10 Setting eMCM to Test Mode 2 - Persistent Idle Factory Test Mode
- B.11 Setting eMCM to Test Mode 3 - Non-Persistent RF Test Mode
- B.12 Setting eMCM to Test Mode 4 - Persistent RF Test Mode
- Appendix C REACH Compliance Statements
- Appendix D Abbreviations and Terms
- Appendix E TRN-2012 / TRN-2113 Mechanical Drawings and Schematics
TRN-2012 / TRN-2113 Integration Specification Overview
On-Ramp Wireless Confidential and Proprietary 2 014-0047-00 Rev. C
1.2 Model Numbers
TRN-2012 with internal antennas
TRN-2113 with external antennas
1.3 Referenced Documents
The following documents are referenced and provide more detail:
Test Mode Software Interface
Appendix B of this manual provides details relating to the Test Mode Interface.
TRN-2012 and TRN-2113 ETSI EMC Test Reports
The EMC Test Reports from third party labs authorized to conduct these tests.
Provisioning Guide (010-0074-00)
Describes setup, configuration, and use of a collection of utilities called Node Provisioning
Tools (NPT) used for Node provisioning.
Node Host Message Specification (014-0020-00)
Provides details relating to Node Host commands and messages.
GE Energy, Operating Level Procedure (OLP): On-Ramp Wireless’ Meter Communication
Module
Describes the incoming/outgoing inspection and RMA process.
On-Ramp Wireless Document 008-0013-00, Process, Return Material Authorization (RMA)
Describes the handling and RMA process between GE and On-Ramp Wireless.