User's Manual

Ultra-Link Processing™ - Access Point
Access Point User’s Guide 012-0001-00 P a g e | 4
On-Ramp Wireless © 2010
Environmental/Operational Parameters
The Access Point was tested to ETSI EN 300 019-2-4 Specification T4.1 for non-weather-
protected locations.
Manufacturer’s Name: On-Ramp Wireless
Manufacturer’s Address: 10920 Via Frontera, Suite 200, San Diego, CA 92127, USA
Declares our sole responsibility that the product:
Product Name: On-Ramp Wireless Access Point, ULPAP110
Conforms to the following Product Specifications:
Safety: IEC 60950-1:2005 (2nd Edition); AM 1:2009
UL 60950-1:2003 R7.06
CAN/CSA-C22.2 No. 60950-1-03
EMC: FCC Part 15, Subpart B, Class B
R&TTE Directive 1999/5/EC
ETSI EN 301 489-3 V2.4.1 (2002-08)
EN55022: 2006/A1 2007 Class B
EN 61000-3-2: 2006
EN 61000-3-3: 2008
EN 61000-4-3: 2006
EN 61000-4-2: 2009
EN 61000-4-4: 2004
EN 61000-4-6: 2009
ICES–003:2004 Class B
ANSI C63.4-2003
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC,
the EMC Directive 2004/108/EC and carries the CE marking. In addition, it complies with the
WEEE Directive 2002/96/EC and RoHS Directive 2002/95/EC.
The product was tested in a typical configuration.
Flame Rating approvals:
• File #E206630, Listed UL 50, UL 508
• CSA Approved
• Det Norske Veritas File #8281.1/FERe
• Maritime Register of Shipping #83033.250
RoHS Compliant Yes