User's Manual

On-Ramp Wireless Incorporated 6 010-0006-00 Rev. F
3 Installation Prerequisites and Considerations
Before starting the actual physical installation of an AP, it is very important to complete the
prerequisite tasks outlined in this chapter as well as take into account the installation considerations
indicated. Information gathering templates are provided in the appendices of this document.
3.1 Installation Prerequisites
3.1.1 Site Survey
A site survey should be conducted prior to installation for all AP sites. The site survey provides
detailed, site-specific, information required to plan an AP installation and should be documented. See
Appendix A for a Site Survey Worksheet template. A copy of this worksheet should be provided to the
installer.
A site survey provides:
Site name
AP antenna mounting location and height
AP name (if different from site name)
Antenna line length required
Site street address or other location
GPS antenna mounting location
Site access information
GPS antenna cable length
Landlord contact information
Specific landlord requirements
AP power type, commercial power, solar
solution or other
Latitude
Distance to available power
Longitude
Site type (building, tower, pole, or other)
Photos of site including antennal location,
AP location, and the overall site
Height of existing structure
Other site-specific information
AP and equipment mounting locations
3.1.2 AP Installation Configuration
The AP installation configuration should be documented and provided to the installer prior to the
start of the installation. See Appendix B for an AP Installation Configuration Worksheet template.
This worksheet provides the following site-specific equipment details and AP configuration
information:
Site name
AP antenna gain
AP name (if different from site name)
AP antenna downtilt, if required
Deployment Type (Omni /Sectorized)
AP physical configuration (outdoor, indoor,
and base station type)
Sector Label (A,B,…)
Sector Heading (N,S,NE,etc…)
AP antenna cable type
AP antenna cable length