User's Manual

AP Deployment Guide - System Release 1.4 AP Installation
On-Ramp Wireless Incorporated 19 010-0006-00 Rev. F
5.5 AP Mounting Details
The AP is supplied with four mounting tabs that facilitate attaching the AP to a wall, in a cabinet,
or to a strut channel, if required. The mounting tabs are attached to the AP by the installer using
four provided, 5/16 inch self-tapping, hex head bolts. See the mounting tabs shown in Error!
Reference source not found..
Mounting Tabs
Installed
Figure 9. AP with Mounting Tabs Installed
5.6 AP Pipe Mount Option
On-Ramp Wireless offers an optional pipe mount kit for the AP. This kit provided two 8-inch
lengths of strut channel that have been drilled to allow attachment to the top and bottom holes
on the back of the AP. The same self-tapping bolts provided with the AP are used to attach the
strut channel in place of the mounting tabs. After attaching the strut channel to the AP, it can
now be attached to any size of pipe using standard strut channel pipe clamps or conduit clamps.