User's Manual

AP Deployment Guide - System Release 1.4 AP Software Configuration via Web Interface
On-Ramp Wireless Incorporated 30 010-0006-00 Rev. F
Field
Unit
Description
Server Port
Number
N/A
The port number when the AP is set to Server mode. When the AP is in
Server mode, this field should be set to 2021. The AP listens on port 2021
for a TCP connection with the Total Reach Gateway. Ensure that port 2021
is allowed on the firewall in your network.
ULP Gateway
Hostname/IP
Address
N/A
 For Server mode, this field is grayed out and not accessible.
 For Client mode, the Total Reach (ULP) Gateway Hostname or IP
Address should be entered here.
ULP Gateway
Port Number
N/A
 For Server mode, this field is grayed out and not accessible.
 For Client mode, this field should be set to 5051. Ensure that port
number 5051 is allowed on the network firewall.
7.3.5 Specifications Submenu
The Specifications submenu displays AP specific configuration information including:
 Manufacturer – Always On-Ramp Wireless Inc.
 Device Type – Always Access Point
 MAC Address
 Hardware Version
 Firmware Version
 Software Version
7.3.6 FW Upgrade Submenu
AP firmware upgrades from the web page interface are not supported on this version of
software. AP software upgrades are performed through EMS.