User's Manual

AP Deployment Guide - System Release 1.4 AP Software Configuration via Web Interface
On-Ramp Wireless Incorporated 35 010-0006-00 Rev. F
To change the password for the AP, enter the new password in both of the following fields:
 Change Password
 Re-type to confirm
After making any changes click on the Submit button.
7.6 Home Menu
The Home menu allows the user to select the following submenus:
 Access Point
 Statistics
 Administration
A submenu maybe selected by clicking its name on the upper right side or left side of the Home
screen.
7.7 Regulatory Domain Setup
Each country has particular limits on transmit power that must be observed and never exceeded
during installation. Note that you cannot configure the regulatory domain for the AP using the
AP Web Interface. Setting the regulatory domain is accomplished using the EMS software for AP
configuration and setup. EMS automatically configures the maximum allowed transmit power
levels (EIRP) taking into account regulatory domain, antenna gain, and cable loss. The full
procedure for how to do this is detailed in the EMS Operator Guide (010-0045-00).