User's Manual

Access Point Product Specification Hardware Installation Verification
24 010-0021-00 Rev. G
Figure 14. Return Loss
Notes:
 Measurements should be taken
with the antenna as well as
with a 50Ω terminating load.
 Type and length of coaxial
cable should be recorded for
each run.
Figure 15. Distance to Fault
6.4 Grounding
Verify that the mounting hardware, AP, antenna cable, and lightning suppressor are properly
grounded.
6.5 Connector Weather Sealing
Verify that all outdoor connectors are properly weather sealed.
6.6 Mounting Hardware
Verify that all mounting hardware is tight and secure.