User's Manual

Access Point Product Specification AP Software Configuration via Web Interface
29 010-0021-00 Rev. G
Table 6. Fields on the Access Point Screen
Column Heading
Description
Sat ID
The Sat ID column provides the name of the GPS satellite to which the AP is
locked or is tracking.
Azimuth
The Azimuth is the direction of a GPS satellite, measured clockwise around the
observer’s horizon from north. Azimuth and altitude or elevation are usually used
together to give the direction of an object in the topocentric coordinate system.
Elevation
The elevation (sometimes called altitude) is the angle at which we see the
satellite when we look up into the sky.
C/N
0
Carrier to Noise (C/N
0
) density ratio is the ratio of the carrier or signal power to
the white-noise spectral density. For the AP GPS receiver to lock to the GPS
satellite, the C/N
0
should be greater than 20 dB-Hz.
7.3.2 About Submenu
The About screen displays device specifications for the AP such as manufacturer, device type,
MAC address of the AP, hardware, firmware, and software versions. There is nothing to
configure on this screen, therefore the fields cannot edited.
7.4 Access Point Menu
The Access Point menu has the following submenus:
 TRN Config
 Field Config
 Backhaul Config
 Site Survey