User's Manual

Access Point Product Specification AP Software Configuration via Web Interface
39 010-0021-00 Rev. G
The following table defines the fields on this screen.
Table 10. Parameters on the Security Configuration Screen
Field
Description
System Services
Preferences
Options are:
 Disable Tenet login?
 Enable SSL for Sockets?
Change ‘admin’ Password
Old Password
To change the password, you must first enter the old password.
New Password
Enter the new password.
Re-type to Confirm
Re-type the new password to confirm the change.
SNMP Configuration
Version
Options are:
 Enable SNMPv2c?
If this is selected, the following options are available:
 Transport
 Community
 Write Community
These options are defined below.
 Enable SNMPv3?
If this is selected, the following options, in addition to those listed above
for SNMPv2C, are available:
 Minimum Security Level
 User Name
 Authentication Protocol
 Authentication Password
 Privacy Protocol
 Privacy Password
These options are defined below.
Transport
Options are:
 Enable SNMP over UDP?
If this is selected, enter the port number.
 Enable SNMP over TCP?
If this is selected, enter the port number.
Community
Specifies SNMPv2c community string (password) for read-only access to the
full tree of SNMP managed objects on the AP. Default value is Public.
Write Community
Specifies SNMPv2c community string (password) for read-write access to
the full tree of SNMP managed objects. The default value is Private.