User's Manual

On-Ramp Wireless Incorporated 51 010-0021-00 Rev. G
Appendix D Base Station Configuration
Table 14. Ingenu TRN Base Station Configuration Options
Base Station Option
Description
Applications
Required Ingenu Hardware
Additional Items Required
TRN-1011
Base Station
 Outdoor base station
 120/240 VAC
powered system with
8 hours of battery
backup
 AP is located in the
equipment cabinet
along with a 3G
modem and battery
backup
Outdoor locations with AC
power requiring 3G modem
backhaul.
For example:
 Communication sites
 Transmission Towers
 Wood distribution poles
 Outdoor Wall mount
 Access Point
 Outdoor equipment cabinet
powered by 120/240 VAC and
contains:
 One Integrated GPS antenna
 One 3G modem
 Two integrated 3G modem
antennas
 Antenna surge suppressor
 Backup battery
 Alarm monitor
 9 dBi AP antenna
 Customer-supplied 3G
Digi modem (U805)
 Site-specific cable for
the AP antenna
 Site-specific installation
hardware
TRN-1021
Base Station
 Outdoor base station
 Solar powered
 Access Point is
located outdoors
 3G modems and
backup batteries are
located inside the
equipment cabinet
Outdoor locations without
power requiring 3G modem
backhaul.
For example:
 Transmission towers
 Sites without power
 Access Point
 Outdoor equipment cabinet
powered by solar system and
contains:
 3G modem
 Two integrated 3G modem
antennas
 Antenna surge suppressor
 Two backup batteries
 Alarm monitor
 GPS antenna
 9 dBi AP antenna
 Pipe mounting hardware for a 4-
inch OD pipe
 All cables (with the exception of the
cable for the AP antenna)
 Customer-supplied 3G
Digi modem (U805)
 Site-specific cable for
the AP antenna
 Customer-supplied
4-inch OD pipe for
mounting equipment
 Site-specific installation
hardware