User's Manual

On-Ramp Wireless Confidential and Proprietary 5 010-0045-00
3 Maintaining and Operating the ULP Network
The following sections describe how to maintain and operate the ULP network through the On-
Ramp Wireless EMS.
3.1 Logging in to the EMS
To log in to the EMS, complete the following steps:
1. Open a web browser, and type:
http://<ip address of the EMS server or DNS name>:8080/nms
2. From the Source drop-down list, select company Domain or Local Account. Typically, it is
expected that installations use the Active Directory.
 Active Directory use is enabled during EMS installation. See the EMS Software
Installation Guide for more information on Active Directory setup.
 If the drop-down list is not visible, the Active Directory configuration is not set up. Log in
with local account access with an account that was created in Maintaining a Local
Account.
3. In the UserID field, type the user ID for this account.
NOTE:
Use the Active Directory account password when logging in to the EMS through the
company Domain. If the company Domain is not active, use an account that was
created in Maintaining a Local Account.