User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 10 010-0045-00
The method in which operators use to initialize a network depends on the following items:
 Complexity of the operator's network
 Availability of site-specific information at the time of initialization
3.4.1 Configuring the Network with the Ingest File - Initialization
Steps
To configure the ULP network with the ingest file method, the operator must first have a valid
ingest file. On-Ramp Wireless provides operators with a valid ingest file to configure the ULP
network. The following example describes how to bring up a network from a single ingest file
that contains information for a Gateway and an AP.
To use the valid ingest file, complete the following steps:
1. Read in an ingest file to configure the Gateway.
2. Read in an ingest file to configure the AP.
3. Read in an ingest file to configure the end device.
3.4.2 Configuring the Gateway with the Ingest File
To configure the Gateway with the ingest file, complete the following steps:
1. Log in to the EMS with an admin account.
2. Click the Devices tab.
3. In the Devices pane, click Batch Upload.