User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 13 010-0045-00
6. After the AP adjusts the GPS time sync and RF Metrics, the AP transitions from a yellow
state to a green state as shown below.
3.5 Configuring the Network Manually
The following sections describe how to perform a manual network configuration.
3.5.1 Adding the Gateway
The ULP Gateway is the point of entry for configuring the ULP network. After logging in to the
EMS, add the Gateway before configuring the other ULP elements, such as APs and/or Nodes.