User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 15 010-0045-00
3. In the Add New Gateway window, complete the information for the following fields.
a. In the Host Address field, type the IP address (or DNS resolvable name) for the machine
running the ULP Gateway.
b. In the Control Port field, the default value is 4021. Do not change this value.
c. Optional: In the Description field, type a description for the Gateway. The description
can be any user-specific information, such as physical location or internal name for the
Gateway.
4. Click Discover. A warning box displays alerting that the Gateway will not be updated in the
EMS until the Gateway is enabled.
5. Click OK.
3.5.2 Configuring ULP Network Parameters
Operators must configure ULP network parameters before enabling the Gateway in the system.
To configure the ULP network parameters, complete the following steps:
1. In the Devices selection pane, select Gateway. The Gateway that was added is displayed.