User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 18 010-0045-00
10. Click the ULP Config tab.
11. In the Gateway Configuration window, complete the information for the following fields.
a. In the System ID (Numeric 0-255) field, type the operator-specific System ID that
matches the operator's network system ID.
b. In the Bandwidth field, the default value (1MHz) is selected from the drop-down list. Do
not change this value.
c. In the Broadcast Spreading Factor field, select 2048 from the drop-down list. The
default value is 2048.
d. In the OTA Security field, select On from the drop-down list.
NOTE:
Typically, for a production system, select On. For a lab and/or a developmental
system, the operator may optionally select Off.
If OTA Security is turned On, the operator must provision Gateway and node keys
for the operator's system to function properly. For information on how to set up
security keys, see the KMS User Guide.
The Key Management Server (KMS) should be up and running before configuring
other pieces of the system.
e. In the Current Regulatory Domain (Max Length 256) field, type the name of the
operator's current regulatory domain.
f. In the Root Key Roller Interval (Numeric 0-65535) field, type 30.
NOTE:
Based on the operator's local information security requirements, this number
may be different from the default number (30). If it is different, enter it now.