User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 19 010-0045-00
g. In the Keep Alive Message Interval (Seconds 5-60) field, type 5.
NOTE:
This parameter affects the generation of the GW Health alarm that the EMS
generates. If the GW has not generated a keep alive signal within 3*<number of
seconds> in this field, the GW Health alarm will be triggered.
12. Click Save.
NOTE:
A pop-up window asks the operator to confirm the restart. Additionally,
there is a place to enter an optional note about this configuration change.
All EMS configuration changes are logged to an audit report. The
information here is logged in this report with the configuration change.
13. A second pop-up window asks the operator to confirm the restart.
14. Click Yes. The pop-up window asks the operator to confirm the restart.
15. Click Yes.
16. In the Device selection pane, click on the GW ID of the Gateway that was added. The
Gateway Configuration window is displayed.
17. Click the Discovery Status tab.
NOTE:
If this is the first time the Gateway has been discovered, the lists and status will be
empty.