User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 22 010-0045-00
8. In the Control Socket Port (Numeric: 1024-65535) field, type 2021.
NOTE:
If the operator has different port information from the site survey, the operator
must type a different control socket port number.
9. In the Control Socket Port Mode field, Server is selected from the drop-down list. Do not
change this value.
10. Click Get Basic Config.
NOTE:
This step forces the EMS to obtain the default settings for this AP from the AP itself.
If these values are correct, the operator can use them. If these values are not
correct, the operator can update them in the next steps.
11. Complete the information for the following fields or make changes as appropriate for the
operator's site.
a. In the Max Control Socket Connection (Numeric from 5-10) field, type 5.
b. In the AP Management Control Socket Port (Numeric: 1024-65535) field, type 2022.
NOTE:
If the operator has different port information from the site survey, the operator
must type a different control socket port number.
c. In the Management Control Socket Port Mode field, select Server.
d. In the Max Management Control Socket Connection (Numeric from 5-10) field, type 5.
e. In the Gateway Address field, leave the default value.
f. In the Gateway Server Socket Port (Numeric: 1024-65535) field, type 5051.
g. In the Gateway and AP Secure Tunnel State field, select Enabled from the drop-down
list.
NOTE:
The Disabled option is available for test and development systems or lab systems
only. All production systems use security.
h. In the DHCP State field, select Disabled.
i. In the Telnet State field, select Disabled. This is an additional test system and/or lab
system deployment feature that is not typically enabled in production systems.
j. In the Default Router field, leave the default setting.
k. In the Netmask field, leave the default setting.
l. In the Name Server(s) field, leave the default setting.
m. In the NTP Server(s) field, leave the default setting.
n. Optional: In the AP Site Name (Max 255 characters) field, type a description for this AP.
o. Optional: In the Backhaul Type field, type a description of the type of TCP/IP backhaul
that the AP uses.
p. Optional: In the Country Code(2 letters) field, type a 2 letter country code.