User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 23 010-0045-00
12. Click Save Basic Config.
NOTE:
If changes were not made, the screen displays no changes made.
If changes were made, a pop-up window allows the operator to enter a description of
this event. This description will be entered into the system's audit report for future
tracking of when changes were made to the system.
13. In the Update Notification pop-up window, click Yes.
NOTE:
If changes were made to the configuration, the AP will reboot. Confirm to reboot the
AP and add an optional audit report log. The operator must wait for the AP to
reboot.
14. Click Next. The Add To Gateway tab is active.
15. Click Add. The pop-up window asks the operator to confirm the addition. A pop-up window
also allows the operator to enter a description of this event. This description will be entered
into the system's audit report for future tracking of when changes were made to the system.
16. Click Yes.