User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 31 010-0045-00
7. Click Add Nodes.
8. Complete the information for the following fields.
a. In the Gateway field, select the Gateway.
b. In the App Type, select the application type for this node from the drop-down list.
c. Optional: Enter a description for the node.
d. In the Add Node ID (In HEX: 0x0000) field, type the ID of the radio node.
9. Click Move to Node ID List. The node displays in the Node ID List field.
10. Click Add.
11. Click Add. A message displays stating that the Node is being added. After the node is
added, it will report Nodes are added.
12. Repeat Steps 8.b through 9 for as many nodes as needed to add for this work order.
3.5.7 Configuring a Specific Device Update Interval (UI) or Listen
Interval (LI)
It is critical that the operator set the device UI and/or LI correctly.
ATTENTION:
The UI/LI for a given device controls how often a device wakes up to receive or
transmit data. This configuration directly controls the energy that a given device
uses. For battery-powered devices, these settings impact how long the battery for
a battery powered device lasts. The tables below define the UI/LI for each type of
device. The operator must follow the settings in this document unless directed
otherwise by the appropriate On-Ramp Wireless personnel.