User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 33 010-0045-00
3. Click the UI/LI Config tab.
This release of the ULP EMS Operator Guide includes the following supported types of end
devices (nodes):
 Sysmon: System monitor node that provides network-specific information to the EMS
operator. This helps the EMS operator to understand the health of the ULP network.
Configure the UI and LI with the values from the following table.
Table 1. Sysmon UI and LI Values
Interval (UI and LI)
Value
UI
every frame
LI
Every update interval
 Fault Circuit Indicator (FCI): Battery powered distribution line device that reports
current and/or voltage faults in a distribution line.
Configure the UI and LI with the values from the following table.
Table 2. FCI UI and LI Values
Interval (UI and LI)
Value
UI
1 per day (24 Hours)
LI
Every update interval
 Remote Monitoring Unit (RMU): Monitors the obstruction lights and reports the
outages of the obstruction lights. These outages must be reported to the FAA.
Configure the UI and LI with the values from the following table.