User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 46 010-0045-00
NOTE:
Several email alert notification groups can be created as necessary for work flow.
In this field, the operator can segment alarm types and create email groups that
are alerted for issues that are of concern. For example, node side alarms should
automatically facilitate the EMS operator to contact the CIMA operator to clarify
the operation of the end device. In this case, it may be beneficial to create an
alarm notification group that selects the node alarm failure types to be sent to a
CIMA email group. The CIMA operators will automatically receive an email alert
from the EMS alarm system when there is a node alarm that they should pay
attention to.
g. In the New E-Mail Address field, type the email addresses for the notification group. If
this is the first time creating notification groups, type the email addresses in this field.
When adding emails in this field, click Create New E-mail. This adds the email addresses
to the User E-mail List.
h. In the Assigned User E-mails field, drag the user's email address from the User E-mail
List to Assigned User E-mails to create the email list for this notification group.
i. Click Save.
Appendix A contains an example of an email alert message. When configuring and using the
email alarm notification system, the operator can disable the email alarms. To disable email
alarms, the operator must log in to the EMS console, and select the Suppress Alarm Notification
E-mails box in the Alarms Summary pane. The Alarms Summary pane is shown below.
3.6.3 Details of the Alarm Console
EMS alarms are visible in the EMS operator’s console display. On the EMS login screen, the
lower pane displays the active alarms in the EMS.