User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 47 010-0045-00
In the following example, there is a single warning in the system.
The single warning is an AP proximity alarm meaning that the lid of AP ID #1 has been opened. If
the email alarm system is in use, this alarm contains an email alert message. For more
information, see Appendix A.
As shown in this example screenshot, the alarm pane of the EMS display includes several drop-
down lists and search fields to help sort and quickly find alarms if there are many alarms to sort
through.
 The Severity drop-down list allows operators to clear the alarm pane of all alarms except for
alarms of a selected severity.
 The Failure drop-down list allows operators to clear the alarm pane of all alarms except for
alarms of a given failure type.
 The Device Type drop-down list allows operators to clear the alarm pane of all alarms
except for alarms of a given device.
 The Alarm ID search field allows operators to search for an Alarm ID from an email. Each
alarm email includes an alarm ID. Use this search field to quickly find known alarms. This
facilitates quick searches to be able to acknowledge alarm emails.
 The Node Description search field allows operators to perform partial matches on
information for each node's description field.
When an alarm has been generated, the EMS operator should acknowledge the alarm before
debugging the issue, particularly if email reminders have been enabled as described above in
Configuring Alarm Emails.