User's Manual

ULP EMS Operator Guide Maintaining and Operating the ULP Network
On-Ramp Wireless Confidential and Proprietary 48 010-0045-00
3.6.4 Acknowledging Alarms
Alarms only need to be acknowledged if the operator previously enabled the EMS to continue to
send email alerts for non-acknowledged alarms. If the operator configured the EMS email
system to send reminder emails, the system will continue to send email reminders for non-
acknowledged alarms at the interval rate specified. Once an alarm has been acknowledged,
reminder emails will not be sent for the acknowledged alarm.
To acknowledge an alarm, complete the following steps:
1. In the alarm pane, select the active alarm.
2. In the Alarm Details window, select Yes from the Acknowledge drop-down list.
3. Click Save. The pop-up window asks the operator to acknowledge the alarm.