Power Screwdriver User Manual

E2000 D PRINTED IN U.S.A.
& [phone] D F AX [phone]
INGERSOLL-RAND COMPANY
P.O. BOX 151 D ONE ARO CENTER D BRYAN, OHIO 43506Ć0151
OPERATOR’S MANUAL 636103
RELEASED: 8-7-85
REVISED: 11-20-00
(REV. L)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
636103
“DU-ALL”
CONTROL HANDLE
LIGHT WEIGHT PIST OL GRIP
READ THIS MANUAL CAREFULL Y BEFORE INST ALLING,
OPERA TING OR SER VICING THIS EQUIPMENT .
It is the responsibility of the employer to place this information in the hands of the operator . Keep for future reference.
INCLUDE MANUAL: 636027 HYDRAULIC COUPLERS AND ADAPTERS (PN 97999Ć183)
WARNING
Whip Hose must not be used on this control hanĆ
dle in place of the tube and nozzle assembly. Pressures develĆ
oped are too great and may burst hose causing accidental
injection.
SER VICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 71139 for repair of control handle.
OPERATION
There are no complicated adjustments and it is easy to clean and serĆ
vice. It uses line pressure for normal lubrication, but for tough fittings,
operator merely squeezes (14) handle several times until fitting opens.
A maximum of 10,000 p.s.i. (689 bar) can be reached by squeezing the
(14) handle several times.
When removing the control handle from a grease fitting, do not pull the
hydraulic coupler straight off of the fitting. Move the control handle so
that the 636028 hydraulic coupler is at an angle of 30_ to 45_ from the
centerline of the fitting. Doing this will ease the removal of the coupler.
636103
MAXIMUM INLET PRESSURE 7500 P.S.I. (517 BAR)
W ARNING: HIGH PRESSURE DEVICE
IMPROPER USAGE OF EQUIPMENT COULD RESUL T IN SERIOUS INJUR Y.
THE POSSIBILITY OF INJECTION INTO THE FLESH IS A POTENTIAL HAZARD.
NEVER ALLOW ANY P ART OF THE HUMAN BODY TO COME IN FRONT OF OR IN
DIRECT CONTACT WITH THE MATERIAL OUTLET.
AN INJECTION INJUR Y CAN BE SERIOUS! IF INJECTION SHOULD OCCUR, CONT ACT A
QUALIFIED PHYSICIAN FOR IMMEDIATE TREATMENT OF SUCH INJURIES.