Technical Diagram

ManualsBrandsIngersoll Rand ManualsRotary15-HP 80-Gallon Rotary Screw Total Air System (230V 3-Phase 145PSI)

8 7 6 5 4

2 1

8 7 6 5 123

Ingersoll Rand

CAD GENERATED DRAWING,

NO MANUAL REVISIONS ALLOWED

DRAWING CONFORMS TO

ASME Y14.5M - 1994

DO NOT SCALE DRAWING

PROPRIETARY NOTICE

UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED

UNLESS OTHERWISE SPECIFIED:

- REMOVE ALL BURRS AND SHARP CORNERS

- WELD SYMBOLS TO BE IN ACCORDANCE

WITH ANSI/AWS A2.4

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET

INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS

GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION

AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE

AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY

INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY

THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION

THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS

EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET

INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO

RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL

COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.

WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED

BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS

AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS.

THIRD ANGLE PROJECTION

DWG NO.

PART NO.

ESTIMATED WEIGHT

(KG UNLESS OTHERWISE SPECIFIED)

NAME

SIZE

MODEL

SHEET

REVISION

SCALE

GENERAL ARRANGEMENT

TOLERANCES

ALL DIMENSIONS ARE IN

MILLIMETERS

[INCHES (IF SHOWN)]

UNSPECIFIED TOLERANCES:

ANGLES

WHOLE :

13.0[.50]

6.0[.25]

Ingersoll-Rand Industrial Technologies

REVISIONS

APP'DDRAWNDATEDESCRIPTIONECNREVZONE

Z.WHITLEY G.SRIKANTH2014MAY05 ORIGINAL RELEASE790486 A

Z.WHITLEY

M.PREETHAM

2014DEC15ADDED SHEET 9,

DIM 631.0 [24.84] WAS 634.7 [24.99],

DIM 266.7 [10.50] WAS 267.0 [10.51],

DIM 35.7 [1.40] WAS 19.5 [.77],

DIM 266.7 [10.50] WAS 295.0 [11.61],

DIM 665.9 [26.22] WAS 663.2 [26.11],

DIM 1161.2 [45.72] WAS 1178.1 [46.38],

DIM 1215.2 [47.84] WAS 1246.2 [49.06],

DIM 438.2 [17.25] WAS 456.0 [17.95],

DIM 285.8 [11.25] WAS 183.0 [7.20],

DIM 13.9 [.55] WAS 22.6 [.89],

DIM 158.8 [6.25] WAS 145.0 [5.71].

960610B

3-B3

3-C3

3-C2

4-B6

4-C6

4-C5

Z.WHITLEYA.DHANA2015JUL17ADDED SHEET 10, DIM 401.0 [15.79] WAS 403.0[15.87]

DIM 289.0 [11.38] WAS 291.0[11.46]

DIM 34.8[1.37] WAS 35.7[1.40]

DIM 14.0[.55] WAS 13.9[.55]

DIM 158.7[6.25] WAS 158.8[6.25]

DIM 401.0 [15.79] WAS 403.0[15.87]

DIM 289.0 [11.38] WAS 291.0[11.46]

IN NOTE 5 ADDED RECOMMENDED CLEARANCE

FOR VSD PACKAGES.

974303C3-C7

3-B7

3-C3

4-C5

6-C7

6-B7

1-C8

C.FRAZIER

M.PRASHANT

2018JAN31REC. TANK 24246035 WAS 24491540 (< 200 PSI)

REC. TANK 47618489001 WAS 47529410001 (> 200 PSI)

UPDATED DRAWING AS PER NEW RECEIVER TANKS

1285281D

GENERAL ARRANGEMENT,

R4-11KW 80G RECEIVER MOUNTED

GENERAL ARRANGEMENT, R4-11KW 80G RECEIVER MOUNTED

SEE NOTE 1

47518742001

47518742 001

0.15 R4 - 11KW 10 OF 1

D.5

DRAWN DATE

G.SRIKANTH 2014MAY05

CHECKED DATE

Z.WHITLEY 2014MAY05

APPROVED DATE

Z.WHITLEY 2014MAY05

DRAWING TYPE

General Arrangement Drawing

NOMENCLATURE

NOTES:

1. WEIGHT (APPROXIMATE): R4I (80G RECEIVER) - 400kg

R4I (80G TAS) - 465kg

R5.5I (80G RECEIVER) - 400kg

R5.5I (80G TAS) - 465kg

R5.5N (80G RECEIVER) - 405kg

R5.5N (80G TAS) - 470kg

R7.5I (80G RECEIVER) - 400kg

R7.5I (80G TAS) - 465kg

R7.5N (80G RECEIVER) - 405kg

R7.5N (80G TAS) - 470kg

R11I (80G RECEIVER) - 415kg

R11I (80G TAS) - 485kg

R11N (80G RECEIVER) - 425kg

R11N (80G TAS) - 495kg

2. COOLING AIR FLOW: 1950m3/h

3. PIPE CONDENSATE DRAIN LINES SEPARATELY TO AN OPEN

DRAIN DUE TO DIFFERENCES IN DRAIN PRESSURES. READ

OPERATIONS MANUAL AND CHECK LOCAL REGULATIONS.

4. LUBRICANT FILL QUANTITY: 5 LITERS.

5. RECOMMENDED CLEARANCE ON THREE SIDES 915MM (36 INCHES),

ON SIDE WITH ELECTRICAL BOX OPENING 1067MM (42 INCHES) OR

MINIMUM AS REQUIRED BY LATEST NATIONAL ELECTRICAL CODE OR

APPLICABLE LOCAL CODES.

FOR VSD PACKAGES ONLY: ENSURE THAT A MINIMUM CLEARANCE OF

102 MM (4 INCHES) IS MAINTAINED IN FRONT OF THE PDM FILTER TO

ALLOW ADEQUATE SPACE FOR MAINTENANCE.

6. EXTERNAL PIPING SHOULD NOT EXERT ANY UNRESOLVED MOMENTS

OR FORCES ON UNIT. USE PIPE OF EQUAL OR GREATER SIZE AT DISCHARGE

LOCATION OF UNIT.

7. THERE SHOULD BE NO PLASTIC OR PVC PIPING ATTACHED TO THIS

UNIT OR USED FOR ANY LINES DOWNSTREAM.

8. REMOVE THE ISOLATION MOUNT RESTRAINTS BEFORE THE INITIAL START.

THE RESTRAINTS CAN BE DISCARDED.

9. FIELD INSTALLED DUCTING TO AND FROM COMPRESSOR CANNOT ADD MORE

THAN 6MM (.25 INCH) OF WATER TOTAL AIR RESISTANCE.

10.UNIT HAS AN INTERNAL DISCHARGE CHECK VALVE, EXTERNAL CHECK VALVE

NOT REQUIRED. ISOLATION VALVE REQUIRED WITHIN 915 MM (36 INCHES)

OF THE COMPRESSOR DISCHARGE.

11.COMPRESSOR SHOULD BE BOLTED TO THE FLOOR WITH FOUR M12 (1/2 INCH) BOLTS

USING HOLES SHOWN ON SHEET 3. SEAL RECEIVER TO FLOOR WITH CORK OR RUBBER.

12.DO NOT PIPE INTO A COMMON HEADER WITH A RECIPROCATING COMPRESSOR. UNLESS

RECIP COMPRESSOR UTILIZES A DISCHARGE PULSATION DAMPENER.

13. DENOTES CENTER OF GRAVITY.

14.SIZING OF ELECTRICAL COMPONENTS NOT SUPPLIED BY INGERSOLL-RAND IS THE

RESPONSIBILITY OF THE CUSTOMER AND SHOULD BE DONE IN ACCORDANCE WITH

THE INFORMATION ON THE COMPRESSOR DATA PLATE, NATIONAL AND LOCAL ELECTRIC

CODES.

15.A BLANK GLAND PLATE IS PROVIDED FOR ELECTRICAL POWER INLET AS INDICATED.

16.WHEN INSTALLED INDOORS IN A CONFINED SPACE, THE COOLING AIR INLET OR

EXHAUST MUST BE DUCTED AWAY FROM UNIT TO PREVENT RECIRCULATION OF HOT

EXHAUST AIR.

CONNECTION LEGEND

- ALL 60 Hz CONNECTIONS ARE NPT (UNLESS SPECIFIED OTHERWISE)

- ALL 50 Hz CONNECTIONS ARE BSPT (UNLESS SPECIFIED OTHERWISE)

A. DISCHARGE AIR: 3/4" INCH (FEMALE)

B. ELECTRICAL INLET: BLANK PLATE SUPPLIED

C. PACKAGE AIR INLET (COMPRESSOR)

D. PACKAGE AIR EXHAUST (COMPRESSOR)

E. PACKAGE AIR INLET (DRYER)

F. PACKAGE AIR EXHAUST (DRYER)

G. CONDENSATE DRAIN 10 MM PUSH-IN (FEMALE)

* OPTIONAL CONDENSATE DRAIN ON NO DRYER VERSION: 1/4NPT

05-Feb-2018 03:39:14 (model D.3/D.5)

Summary of content (10 pages)

PAGE 1
8 7 6 5 4 3 1 REVISIONS NOTES: D 2 ZONE 1. WEIGHT (APPROXIMATE): R4I (80G RECEIVER) - 400kg R4I (80G TAS) - 465kg R5.5I (80G RECEIVER) - 400kg R5.5I (80G TAS) - 465kg R5.5N (80G RECEIVER) - 405kg R5.5N (80G TAS) - 470kg R7.5I (80G RECEIVER) - 400kg R7.5I (80G TAS) - 465kg R7.5N (80G RECEIVER) - 405kg R7.
PAGE 2
8 7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH RECEIVER - DRYER D D C C B B FRONT RIGHT END REAR LEFT END THESE VIEWS ARE SHOWN FOR REFERENCE ONLY A A PROPRIETARY NOTICE THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS AUTHORIZE D IN WRITING BY INGERSOLL-RAND CO.
PAGE 3
8 7 6 5 4 373.0 [14.69] 35.8 [1.41] 3 2 464.5 [18.29] 1 GENERAL ARRANGEMENT WITH RECEIVER - DRYER 93.0 [3.66] D D 763.8 [30.07] 565.0 [22.24] 4.0 [.16] DETAIL A SCALE 0.500 38.0 [1.50] D R 690.0 [27.17] TOP VIEW SEE DETAIL A C 62.0 [2.44] 401.0 [15.79] AIR FLOW 1156.6 [45.53] 28.6 [1.12] 690.0 [27.17] 660.73 [26.013] 35.1 [1.38] 266.7 [10.50] C 296.0 [11.65] 268.0 [10.55] C AIR FLOW 289.0 [11.38] 1794.3 [70.64] F 266.7 [10.50] B 1398.3 [55.05] 1186.5 [46.
PAGE 4
8 7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH RECEIVER - DRYER D 14.5 [.57] 158.8 [6.25] AIR FLOW D 27.6 [1.08] E 268.0 [10.55] 285.8 [11.25] C C B AIR FLOW 438.2 [17.25] 472.7 [18.61] 1524.3 [60.01] 1303.4 [51.31] 1249.4 [49.19] 1144.8 [45.07] B B 754.1 [29.69] A BACK VIEW A A PROPRIETARY NOTICE THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE.
PAGE 5
8 7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH RECEIVER - DRYER D D EVAPORATOR GP DRYER FILTER HE DRYER FILTER HEAT EXCHANGER BALL VALVE C C RECEIVER TANK DRYER CONTROLLER G COMPRESSOR PRESSURE TRANSDUCER THESE VIEWS ARE SHOWN FOR REFERENCE ONLY B B PRESSURE RELIEF VALVE A A PROPRIETARY NOTICE THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE.
PAGE 6
8 7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH RECEIVER - NO DRYER D D D TOP VIEW THIS VIEW IS SHOWN FOR REFERENCE ONLY 960.1 [37.80] 62.0 [2.44] AIR FLOW 728.0 [28.66] 401.0 [15.79] 737.29 [29.027] 725.8 [28.58] 690.0 [27.17] C C C 289.0 [11.38] 1794.3 [70.64] AIR FLOW B B 968.12 [38.115] 728.8 [28.69] 385.95 [15.195] PACKAGE LIFTING POINTS 1003.3 [39.50] 295.5 [11.63] 419.1 [16.50] 1594.3 [62.77] LEFT VIEW A 209.6 [8.25] 514.4 [20.25] 1741.4 [68.
PAGE 7
8 7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH RECEIVER - NO DRYER D AIR FLOW D 27.6 [1.08] 268.0 [10.55] B C C AIR FLOW 151.6 [5.97] 1524.3 [60.01] 1144.8 [45.07] B B A BACK VIEW A A PROPRIETARY NOTICE THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE.
PAGE 8
7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH RECEIVER - NO DRYER COOLER COMBINATION (AIR/OIL) COOLENT FILTER MODULE SEPARATOR MODULE D D COOLANT FILL PLUG PRESSURE TRANSDUCER MINIMUM PRESSURE CHECK VALVE COMPRESSOR CONTROLLER SIGHT GLASS AIREND CE55NX EMERGENCY STOP COOLANT DRAIN VALVE PDM FILTER C C AIR FILTER ASSEMBLY PDM FILTER TEMP SENSOR DRIVE BELT BASE MOTOR B B RECEIVER THESE VIEWS ARE SHOWN FOR REFERENCE ONLY PACKAGE PRE FILTER A A PROPRIETARY NOTICE THIS DRAWING CONTAIN
PAGE 9
8 7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH RECEIVER - NO DRYER D D BLOWDOWN ORIFICE SCAVENGE ORIFICE C C CARRIAGE BOLT B B JACK BOLT A A THIS VIEW IS SHOWN FOR REFERENCE ONLY PROPRIETARY NOTICE THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE.
PAGE 10
8 7 6 5 4 3 2 1 GENERAL ARRANGEMENT WITH OPTIONAL OUTDOOR MODIFICATION (OPTION IS NOT AVAILABLE FOR DRYER OR VSD UNITS) D D C C THIS VIEW IS SHOWN FOR REFERENCE ONLY 322.0 [12.68] 637.1 [25.08] 568.0 [22.36] AIR FLOW 58 D 91.5 [3.60] 372.0 [14.65] B B 2164.8 [85.23] 320.7 [12.63] AIR FLOW C 89.1 [3.51] 717.8 [28.26] A 43.0 [1.69] 439.1 [17.29] RIGHT END VIEW 1049.1 [41.