Manual Ver. 1 INGICS TECHNOLOGY iBM40R2 Manual Ver. 1 Jan. 2019 Embedded BLE Module for M2M and IOT INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Contents Contents Application Electrical Specification General Specification Absolute Maximum Ratings Recommended Operating Ratings Current Consumption Other Characteristic RF Specification RX Sensitivity TX Output Power Pin Assignments PCB Pin Outline Pin Description Dimensions Physical Dimensions Layout Example On Module Chip Antenna 2. External Chip Antenna 3. External Inverted F PCB Antenna Antenna Pattern and Gain Chip Antenna( for internal and external) 2.
Manual Ver. 1 Application INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Electrical Specification General Specification Model Name iBM40R2 Product Description BLE module Dimension 9 mm x 12.5 mm x 1.9mm ±0.5mm Module Interface UART/JTAG Ambient temperature -20°C to 70°C Storage temperature -40°C to 85°C Humidity Operating Humidity 10% to 95% Non-Condensing Storage Humidity 5% to 95% Non-Condensing Absolute Maximum Ratings Recommended Operating Ratings INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Current Consumption INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Other Characteristic RF Specification RX Sensitivity 1Mbps, GFSK, 250-KHz deviation, Bluetooth low energy mode and 1%BER TX Output Power INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Pin Assignments PCB Pin Outline Pin Description INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Dimensions Physical Dimensions INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Layout Example 1. On Module Chip Antenna 2. External Chip Antenna INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 3. External Inverted F PCB Antenna Antenna Pattern and Gain 1. Chip Antenna INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 2. Inverted F PCB antenna INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Revision History Date Revision Jan. 2019 1 INGICS TECHNOLOGY CO., LTD. • Changes Initial release SUPPORT@INGICS.COM • WWW.INGICS.
Manual Ver. 1 Integration Instructions This instruction is to meet the requirement of FCC KDB 996369 D03 OEM Manual v01. List of applicable FCC rules As listed in the Statement section. The specific operational use conditions This module is approved by using three kinds of antenna arrangement which is listed in Layout Example section. Other antenna arrangement is not covered by this certification. Trace antenna designs In the Layout Example section, item2 and 3, a PCB trace leads to the antenna is used.
Manual Ver. 1 Label and compliance information As stated in Certification section Information on test modes and additional testing requirements The module is based on TI’s CC2640R2F chip. For testing the module on your product, please refer to TI SmartRF Studio http://www.ti.com/tool/SMARTRFTM-STUDIO on how to configure and evaluate the module.
Manual Ver. 1 Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Déclaration d'Industrie Canada Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
